EVE Audio SC207 2-Way 7″ Active Studio Monitor
| Product Dimensions | 8.46 x 11.02 x 12.99 inches |
|---|---|
| Item Weight | 19.84 pounds |
| ASIN | B00GXO5RAK |
| Item model number | EVPSC207 |
Description
Are you a home recording musician or producer? Not a problem. The SC207 has great power efficiency that will let you clearly examine what’s happening in your music. Are you a post production professional working in a tight or smaller room? Not a problem. The modest and elegant size of the SC207, along with its quality precision, will make it great in your setup without overwhelming your working area. The SC207 will be attractive to a large range of listeners, as its size and form factor make them appropriate for a lot of different rooms.Tech TalkWith the SC207, you will get an extended bass frequency response (down to 44 Hz), courtesy of the 6.5″ SilverCone honeycomb structured woofer and driven by a 1.5″ AMT RS2 voice coil. The result is a very tight and dynamic bass, along with the usual greater linear excursion. A PWM amplifier, with protection-limiting and capable of delivering a short-term output power of 100W, guarantees that the SC207 will never run out of juice. And with a maximum output level of 106 dB (SPL @ 1m), you can be sure that there is plenty of power to make critical and precise judgements over your mixes. The SC207 is also the first EVE model monitor that uses the proprietary AMT (Air Motion Transformer) RS2. That means it can deliver a higher output level that is due to a bigger magnet system inside. As with every other EVE Audio speaker, you get both balanced XLR inputs and unbalanced RCA inputs for greater convenience. DSPWith every EVE Audio speaker, you also get high resolution DSP electronics. One push knob operation and you will have access to accurate volume control and several different filter settings that will help you tailor your monitors to the way you work. And if you always avoid digital processing, we’ve got you covered. The DSP engine is supported with a high quality A/D converter from Burr-Brown, which delivers a pristine signal to the DSP section. And since the PWM amplifiers are directly connected to the DSP, no additio
Related products
-
aktiv 05 Top Quality 5″ Studio Reference Monitor
- 2-way powered speaker / active studio monitor speaker
- 5″ kevlar curved cone (magnetic shielding type) as LF driver
- 1″ silk dome tweeter as HF driver
- output power 60W (HF 30W, LF 30W), 85W AC consumption power
- magnetically shielded for desktop operation
- input connections: XLR / TS1/4″ combo connector, balanced / unbalanced input
- input impedance: 23.3 kOhm balanced, 13.3 kOhm unbalanced
- input sensitivity: 75mV@1Watt, 415mV@30Watt
- frequency response: 50Hz – 20kHz
- crossover frequency: 2.5 kHz
- SPL: 88dB +/- 3dB
- operating voltage: AC100-240V 50/60Hz, with 115V / 230V AC selection switch
- blue power LED on the front
- standby function, can be turned on and off (only models sold in certain countries)
- dimensions: 250mm (H) x 176mm (W) x 200mm (D)
- weight: ca. 4.5kg
- 1 Year Warranty From Nepal Music Gallery
₨38,000.00 -
2% OFF
Original price was: ₨38,900.00.₨38,000.00Current price is: ₨38,000.00.Mackie CR5-X Series, 5-Inch Multimedia Monitors with Professional Studio- Pair
Original price was: ₨38,900.00.₨38,000.00Current price is: ₨38,000.00. -
uniK 05+ Professional Active Reference 5″ Studio Monitor
- Biamp 2-Way Powered Speaker System
- Active Studio Monitor Speaker
- HF Driver: extremely low mass magnetostactic tweeter Φ49 x 26 mm
- LF Driver: 5″ kevlar curved cone (magnetic shielding type)
- Output Power: 80W (HF: 40W, LF: 40W), 110W AC consumption power
- Frequency Response: 49Hz – 25kHz
- Input Impedance: 27.2kOhm (balanced) / 13.6kOhm (unbalanced)
- Crossover Point: 3.2kHz
- SPL: 101dB, Peak 104dB
- Input Connectors: XLR / TRS 1/4″ combo connector, balanced / unbalanced
- Gain Control: -14 .. 0dB .. +14
- Room Adjustments Control: Character: -6 .. 0dB .. +6; Low: -5 .. 0dB .. +5; High: -5 .. 0dB .. +5
- Rear Bass-Reflex ventilation, optimized for near field application
- Ground lift switch
- Standby function, can be turned on and off
- Indicator: multi color LED on front panel, power on orange, standby red
- Feet: 4 pieces rubberized, adjustable height separately
- Working Voltage: AC100-240V 50/60Hz
- Dimensions (W x H x D): 190 x 265 x 210mm
- Weight: 4.4 kg
₨48,000.00
Reviews
There are no reviews yet.