sE Electronics – X1 S Microphone with Reflection Filter X, Shockmount and Cable Pack
₨45,500.00 Original price was: ₨45,500.00.₨42,500.00Current price is: ₨42,500.00.
Brand | SE Electronics |
Connectivity Technology | XLR |
Connector Type | XLR Connector |
Color | X1 S – Studio Bundle |
Polar Pattern | Unidirectional |
Item Weight | 6 Pounds |
Item Dimensions LxWxH | 20.5 x 18.25 x 10.25 inches |
Power Source | Corded Electric |
Signal-to-Noise Ratio | 85 dB |
Number of Channels | 1 |
About this item
- Polar Pattern for X1S – Cardiod
- Frequency Range for X1S – 20Hz to 20kHz
- X1S Phantom Power- 48v
- X1S Impedance – 125 Ohms
- X1S Signal to Noise Ratio – 85db
Description
All the essentials to get your home studio sounding great: sE’s best-selling X1 S microphone and RF-X Reflexion Filter, sE’s Isolation Pack (shock mount and adjustable metal pop filter) and a high-quality 3-meter XLR mic cable.
If you’re recording in a non-acoustically-treated space (bedrooms, closets, etc.), a Reflexion Filter helps keep your signal clean without the sound of your room affecting it, for professional studio sound anywhere. Coupled with the great-sounding, handcrafted X1 S condenser microphone, sE’s Isolation Pack and a mic cable, the X1 S Studio Bundle has everything you need to capture great-sounding music, no matter where you’re recording.
“I got the new X1 S and within 24 hours I was using it on a production for a major artist.”
– Ronan Chris Murphy, Producer / Engineer (King Crimson, Terry Bozzio, Steve Morse, Ulver)
What’s in the box?
|
|
|
---|---|---|
HANDCRAFTED X1 S CONDENSER MICROPHONEsE’s best-selling X1 S microphone features a handcrafted gold-sputtered large-diaphragm condenser capsule, a cardioid polar pattern, two switchable low-cut filters, and two switchable attenuation pads. Its high-performance electronics produce a beautiful signal with incredibly low noise, and its robust all-metal construction and premium finish ensure efficient rejection of any electrical interference and noise. |
RF-X REFLEXION FILTERIf you’re recording anywhere outside of a professionally-designed recording studio, you’re going to need to deal with the sound of the room around you showing up on a recording – unless you have a Reflexion Filter. sE invented the Reflexion Filter Pro in 2006, and has since produced over 120,000 of them for home studios, project studios, recording on the road, and more. The RF-X helps you get a great studio-quality sound, no matter WHERE you’re recording. |
SHOCK MOUNT, POP FILTER, AND CABLEsE’s Isolation Pack features a clever quick-lock shock mount that securely holds your X1 S microphone in place with a single turn of a knob. The metal pop filter is vertically adjustable to suit your preference, and the whole thing helps to isolate your mic from physical vibration in the room and from the floor. The X1 S Studio Bundle also includes a high-quality 3-meter XLR cable, so you just need to add your mic pre or interface and you’re ready to go. |
Why a handcrafted capsule?
…because they sound better that way.
As with all of sE’s true condensers, the X1 S’s gold-sputtered capsule is handcrafted and hand-tuned by skilled technicians in our own factory. This is almost unheard-of for affordable microphones, and is a great point of pride for us.
The ideal all-around recording solution.
|
|
|
---|---|---|
Your vocals will sound amazing. |
Your guitars? Better than ever. |
Even your drums can be captured with the X1 S. |
X1 S MICROPHONE SPECIFICATIONS
Capsule Type: Hand-Crafted 1″ True Condenser
Polar Pattern: Cardioid
Frequency range: 20 Hz – 20 kHz
Sensitivity: 30 mV/Pa (-30.5 dBV)
Max SPL: 140 / 150 / 160 dB (0/10/20 dB pad) (0.5% THD @ 1kHz)
Equivalent noise level: 9 dB(A)
Dynamic range: 131 / 141 / 151 dB (0/10/20 dB Attentuation pad)
Signal to Noise Ratio: 85 dB
Low-cut filter: 80 / 160 Hz, 6 dB/Oct, switchable
Attenuation Pad: 10 / 20dB, switchable
Powering: 48 Volts according to IEC 61938
Electrical Impedance: 125 Ohms
Recommended load impedance: >1k Ohms
Current consumption: 6 mA
Connectivity: 3-pin male XLR connector
Dimensions: Diameter: 58mm (2.28 in), Length 169mm (6.65 in)
Weight: 445 g (15.70 oz.)
Related products
-
Professional Conference Microphone -Desktop
- Snap-fit foam windscreen
- PROFESSIONAL SOUND QUALITY
- ULTRA-WIDE FREQUENCY RESPONSE
- ADJUSTABLE NECK
Categories: Accessories, Microphones, Mixer & Studio Equipment₨3,200.00 -
9% OFF
₨22,500.00Original price was: ₨22,500.00.₨20,500.00Current price is: ₨20,500.00.Takstar SM-10B-M-Studio Microphone
Large gold-plated diaphragm for accurate sound reproduction
• Cardioid directivity characteristic for ideal sound capturing
• Wide and smooth frequency response range
• Optional bass filter to eliminate unwanted low frequency noises
• Optional 10dB attenuation for handling extremely high volume level
• Clip-tight elastic-suspension shock mount included
• High performance at low priceCategories: Accessories, Microphones, Mixer & Studio Equipment₨22,500.00Original price was: ₨22,500.00.₨20,500.00Current price is: ₨20,500.00. -
₨1,500.00
Mic Stand for Harmonium, Tabla ,Drum
Brand NMG-STAND Material Metal Item Weight 990 Grams Item Dimensions LxWxH 10 x 5 x 1.25 inches Style Stand
About this item
- Desktop microphone stand
- Designed to hold any standard microphone for desktop placement
- Weighted metal base for stability
- Country of Origin: China
Categories: Accessories, Microphones, Mixer & Studio Equipment₨1,500.00
Reviews
There are no reviews yet.