EVE Audio SC208 2-Way 8″ Active Studio Monitor
| Product Dimensions | 10.04 x 12.99 x 15.35 inches |
|---|---|
| Item Weight | 18 pounds |
| ASIN | B00GXO5T3U |
| Item model number | SC208 |
Description
Do you need to hear a tight and full frequency bass in your mixes but don’t want to invest in a subwoofer just yet? Then the SC208 is probably for you. It features the same ease of use and detailed timbre reproduction of all other two-way monitors. But with a larger woofer and more powerful amplifiers, the SC208 will probably be used as a main speaker in a lot of professional and home-studios. If you’re looking for a capable and detailed set of above-average size monitors try the SC208. You will be surprised! Tech TalkWith the SC208, you will be able to extend your bass frequency response down to 36 Hz. The custom-made 8″ SilverCone woofer driven by a 1.5″ voice coil will guarantee that you will not run out of bass response when it comes to the critical listening and comparison of your mixes. The result is a very tight and dynamic bass, along with the usual greater linear excursion provided in every other EVE Audio model. The PWM amplifier, with protection-limiting, is able to deliver a short-term output power of 150W for a maximum output level of 112 dB (SPL @ 1m). So you can be sure that there will be plenty of power to make critical and precise judgements over your mixes. The SC208 also uses EVE’s proprietary AMT (Air Motion Transformer) RS2. The RS2 stands for Ribbon System 2, meaning it has a bigger front plate and a larger magnet driving the motion with the utmost efficiency. As with every other EVE Audio speaker, you get both balanced XLR inputs and unbalanced RCA inputs for greater convenience. DSPWith every EVE Audio speaker, you also get high resolution DSP electronics. One push knob operation and you will have access to accurate volume control and several different filter settings that will help you tailor your monitors to the way you work. If you always avoid digital processing, we’ve got you covered. The DSP engine is supported with a high quality A/D converter from Burr-Brown, which delivers a pristine signal to the DSP section.
Related products
-
aktiv 10s Powered Studio Monitoring Subwoofer
- 10″ bass reflex powered subwoofer
- amplifier power: 150W@100Hz, 4 Ohm, 0.1% THD
- subwoofer crossover frequency: 50Hz – 180Hz (adjustable)
- separate satellite output crossover frequency: @100Hz and flat (adjustable)
- phase control
- input level control
- power mode: standby and on
- inputs: balanced XLR, unbalanced 1/4″ TRS
- outputs: balanced XLR
- input impedance: 20kOhm balanced, 10kOhm unbalanced
- foot switch input as mute control
- dimensions: 340mm(H) x 340mm(W) x 340mm(D)
- weight: 14 kg
₨38,000.00 -
-
uniK 05+ Professional Active Reference 5″ Studio Monitor
- Biamp 2-Way Powered Speaker System
- Active Studio Monitor Speaker
- HF Driver: extremely low mass magnetostactic tweeter Φ49 x 26 mm
- LF Driver: 5″ kevlar curved cone (magnetic shielding type)
- Output Power: 80W (HF: 40W, LF: 40W), 110W AC consumption power
- Frequency Response: 49Hz – 25kHz
- Input Impedance: 27.2kOhm (balanced) / 13.6kOhm (unbalanced)
- Crossover Point: 3.2kHz
- SPL: 101dB, Peak 104dB
- Input Connectors: XLR / TRS 1/4″ combo connector, balanced / unbalanced
- Gain Control: -14 .. 0dB .. +14
- Room Adjustments Control: Character: -6 .. 0dB .. +6; Low: -5 .. 0dB .. +5; High: -5 .. 0dB .. +5
- Rear Bass-Reflex ventilation, optimized for near field application
- Ground lift switch
- Standby function, can be turned on and off
- Indicator: multi color LED on front panel, power on orange, standby red
- Feet: 4 pieces rubberized, adjustable height separately
- Working Voltage: AC100-240V 50/60Hz
- Dimensions (W x H x D): 190 x 265 x 210mm
- Weight: 4.4 kg
₨48,000.00
Reviews
There are no reviews yet.