Warm Audio WA-47jr Condensor Microphone

₨45,000.00

Recommended Uses For Product Singing
Brand Warm Audio
Connectivity Technology XLR
Connector Type XLR
Color Nickel
Included Components Shockmount, Hard Mount, Zipper Storage Pack
Polar Pattern Unidirectional, Bidirectional, Omnidirectional
Item Weight 0.01 Ounces
Impedance 100 Ohm
Microphone Form Factor Large Diaphragm

About this item

FET Transformerless ’47 Style Condenser Microphone
Capsule Makeup: Gold Sputtered, Dual Large Diaphragm, Single Backplate, 6 Microns NOS Mylar (PET Film)
Polar Patterns: Cardioid, Figure-Of-Eight, And Omnidirectional
Pad: -10db
High-Pass Filter: 70Hz

Description

Offered here in a silver finish, the Warm Audio WA-47jr is a large-diaphragm FET condenser microphone designed to provide the tonal characteristics of classic solid-state U47 microphones for vocalists, musicians, and recording engineers in home, project, and commercial recording studios. Thanks to three polar patterns—cardioid, omnidirectional, and figure-8—selectable from a switch on the front of the body, its versatility allows it to excel at anything from dry, close-up vocals to ambient room sounds. A -10 dB pad switch raises the maximum SPL from 147 dB to a high of 157 dB, enabling safe use when miking kick drums and cranked guitar and bass amps. Excessive low frequencies from proximity effect are easily

reduced via the high-pass filter, which rolls off lows below 70 Hz.

The K47-style capsule reproduction features dual gold-sputtered, 6-micron Mylar diaphragms with a single backplate. The fully discrete signal path includes Toshiba FETs, WIMA film capacitors, and Panasonic electrolytic capacitors to deliver the clean tone associated with transformerless microphones. With a gold-plated XLR 3-pin connector and operability via 48V phantom power, it is compatible with most mixing consoles and mic preamps. It comes with a vibration-reducing shockmount and a compact hardmount to allow flexibility in placement and positioning.

Custom Capsule

The WA-47jr utilizes a custom reproduction of the vintage K47-style capsule that was used in the classic U47 microphone—designed with the same pattern and frequency response. Warm Audio’s version of this capsule (model WA-47-B-80v) is carefully manufactured by an Australian capsule manufacturer whose precision and consistency allows sonic replication of the most important piece of this classic style of microphone.

Low Noise

The WA-47jr’s discrete signal path pairs with the true U47-style capsule to obtain a very similar tone to the classic U47 microphone. The low self-noise of only 9 dBA enables pristine capture of quiet sound sources.

Tone-Impacting Components

The WA-47jr incorporates a modernized and simplified circuit design. Toshiba FETs, WIMA film capacitors, and Panasonic electrolytic capacitors contribute to the signature tone of the mic.

Configuration Flexibility

Three polar patterns and a -10 dB pad enable versatility for close and distant positions and loud and quiet sources. The 70 Hz high-pass filter aids in reducing rumble, proximity effect, and excessive low frequencies.

Features at a Glance

Updated transformerless version of the highly coveted classic ’47 microphone
Custom-made Warm Audio K47-style 1.3″ capsule (model# WA-47-B-80v)
Gold-sputtered, dual large diaphragms (6-micron Mylar) with a single backplate
Fully discrete signal path, Toshiba FETs, Wima film capacitors, and Panasonic electrolytic capacitors
Cardioid, figure-8, and omnidirectional polar patterns
70 Hz high-pass filter
-10 dB pad
XLR 3-pin output
Requires 48V phantom power
Includes shockmount, hardmount, and pouch

Reviews

There are no reviews yet.

Be the first to review “Warm Audio WA-47jr Condensor Microphone”

Behringer	Behringer
Microphone Type	Dynamic
Microphone Polar Pattern	Supercardioid
Microphone Frequency Response	50Hz – 16kHz
Microphone Output Impedance	300Ohm
Microphone Output Connector	XLR
Weight (kg)	1kg
Height (cm)	3cm
Width (cm)	3cm
Depth (cm)	13cm
Manufacturer Part Number	BA85A
Country of Origin	Germany